Full Over Full Bunk Bed Plans For Adults
Full over full bunk bed plans – Stacking two full-size beds on top of each other, more known as “full-over-full” bunk beds, is getting more and more popular. Full-size mattresses usually measure 54 x 75 inches (137 x 190 cm). Although some manufacturers dimension their mattresses a little differently. There are plans for full crowded bunk beds, but you probably will not find any free plans on the web. Fortunately, it’s not hard to make your own plans. Since full beds are not much bigger than two beds, it’s quite simple to use plans for two brits and resize them using plans for a full-size or double bed.
Do you want a unit with two beds, or do you want beds that can be separated? The former is a simple full over full bunk bed plans construction project, but the latter requires some extra thought. The key is to build two bedside tables and two footboards that can be used in any combination. The easiest way to accomplish this is to use commercial hardware to connect the rails to the end pieces. You will also need to center and drill eight half-inch holes. One at the top of the corner posts on each bedside. And one again on the bottom of the footstep corner posts.
Then you can mount the lower floor with both bedside tables and the crossover with both footboards. Inserting dime half-inch diameter in these holes will keep the beds in place. Head space is also an important factor. You should try to leave at least two feet of head space. Platform full over full bunk bed plans make it easier to create this space than beds that use box springs. Do not forget to bring the protective rails. To be effective, they should rise 5 or 6 inches above the mattress. If not stuck properly on the bed, the strong ladders are useless. For these goals, you will probably want to use metal mounting equipment.