How to make bunk beds – The children love bunk beds. A litter can even become a ship, a fortress or a princess castle. The agreement a bed on top of the other, creates an intimate space where siblings can share ideas and secrets. In a small room, bunk beds make it possible to have your space separated even though they share a space to sleep two people. It is not difficult to build a sturdy wooden berth that will serve a multitude of purposes over the years. These instructions should result in a very simple berth that fits twin mattresses (39 x 75 inches). The bottom mattress will be approximately 1.5 feet off the floor; the top mattress will be about 5 feet off the floor. You can adjust these measurements to suit.
How to make bunk beds, cut the wood. All measurements are approximate, cutting wood can adjust to meet your own specifications. Inside each 4 x 4 post, measure and mark the location of the side panels and the head and footboard of the lower berth. You want the bottom edge of the side plate 2 x 6 to about one foot off the floor. Your head and stirrups should lean only on your side boards. All 2 x 6 pieces must be fixed inside the surfaces of your posts 4 x 4. On the outside of your 4 x 4 positions, using the first marks as a guide, measure and drill holes to place the side tables. Mark the holes to make a diagonal line through the mails.
How to make bunk beds, on the outer edge side of your 4 x 4 posts, measure and mark head holes and stirrups. Lay all the pieces out and check your work. They are some of which brands are good, drill holes through the 4 x 4 posts and sideboards. Fix the sideboards to the posts with screws. Then, drill holes through the 4 x 4 posts and head and stirrups and fasten the head and stirrups to the posts with screws. Cut half-ply plywood to fit perfectly on top of the trimmer category. Fix the plywood firmly to the sides with screws. Allow enough space between the upper and lower berths of a person to sit.