White bunk beds twin over full gives you a double bed on top of a double or queen sized bed beneath. Although many styles are available, commissioned style wood frames are usually purchased for heavy frames and simple designs. This type of bunk bed is not difficult to mount, but having a helper can make mounting faster. Most manufacturers provide you with everything you need to mount your bunk bed, including bolts, shelves and rails. Mattresses rule is not included, but can always recommend suitable sizes when you buy your bed.
White bunk beds twin over full assembly instructions. Insert nuts that come with bunk beds in the mounting holes at both ends of each side socket. You should have a total of four rails and 16 barrels nuts, which are small cylinders. Some bunk beds have these already in the holes, so if you do not get nuts with your bunk bed check the holes in the rails. Position the end of the wall against a wall and fasten the side rails by placing two of the bolts through the end of the end and on the rails on each side. Connect the other end of the rails to the footplate by placing two bolts through the holes on each side of the footsteps and on the rail, and tighten with the Allen key. Aim the center of the entire bed frame so that the mounting holes are aligned with those in the center of the main frame and the footplate. Insert the screws that come with bunk beds and tighten with an Allen key.
Place the assembled entire white bunk beds twin over full frame in the place you have chosen for the bed, orient the headboard and footsteps appropriately. Align the remaining two side rails so that the holes at the end align with the holes in the double bed. Put two bolts through the double headgear and the rails, and tighten. Insert two screws through the footsteps and into the rails at the opposite end, and tighten.
12 White Bunk Beds Twin Over Full Ideas Photos